Change The Device Name - Zte Z815 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

range.

To connect to a secured network, you first need to get the

security details from the network's administrator.

1. Touch the Home key>

2. Slide the Wi-Fi switch to the On position.

3. Touch >Add network.

4. Enter the network SSID (name). If necessary, enter security

or other network configuration details.

5. Touch SAVE.

Connect to a WPS Network

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to

add your phone to access points which support WPS.

You can use one of the following two methods to connect your

phone to a wireless network using WPS.

Method one: WPS button

1. Touch the Home key>

2. Slide the Wi-Fi switch to the On position.

3. Touch > Advanced > WPS Push Button.

4. Press the WPS button on the access point and the access

point will recognise your phone and add it to the network.

Method two: PIN number

1. Touch the Home key>

2. Slide the Wi-Fi switch to the On position.

Wi-Fi is off.



Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi

on in sleep mode.



Install certificates: Install certificates needed for

connecting to certain Wi-Fi networks.



Wi-Fi Direct: Use the Wi-Fi Direct feature.



WPS Push Button: Connect to a WPS network via the

push button method.



WPS Pin Entry: Connect to a WPS network via the

phone PIN method.



MAC address: Check the MAC address.



IP address: Check the phone's IP address.

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to share files and data directly

by connecting to each other without the need for wireless access

points (hotspots).

NOTE:

Activating this feature will disconnect your current Wi-Fi network

connection.

1. Touch the Home key>

2. Touch > Advanced > Wi-Fi Direct.Your phone will search

for other devices enabled with Wi-Fi Direct connections.

3. Touch a device name below Peer devices to connect with it.

The other device will receive a connection prompt and need

>Settings > Wi-Fi.

>Settings >Wi-Fi.

3. Touch > Advanced > WPS Pin Entry.

4. The WPS PIN number displays on the screen. Enter the PIN

number into the access point's setup page.

After entering the PIN number, your phone automatically finds

the access point and configures the connection.

NOTE:

For detailed information about the WPS feature of the access

point, please refer to its user documents.

Forget a Wi-Fi Network

You can make your phone forget about the details of a Wi-Fi

network that you added - for example, if you don't want the phone

to connect to it automatically or if it is a network that you no

longer use.

1. Touch the Home key>

2. Slide the Wi-Fi switch to the On position.

3. Touch the Wi-Fi network name and then touch FORGET.

Adjust Advanced Wi-Fi Settings

1. Touch the Home key>

2. Touch > Advanced to adjust the following settings.



Network notification: Get notifications in the status bar

when Wi-Fi is on and an open network is available.



Scanning always available: Let Google's location

service and other apps scan for networks even when

to accept the request. Both devices may need to enter a

common PIN.

4. Once connected the device is displayed as "Connected" in

the Wi-Fi Directscreen.

Connecting to Bluetooth

Bluetooth

is a short-range wireless communication technology.

Phones or other devices with Bluetooth capabilities can

exchange information wirelessly within a distance of about 10

meters (32.8 feet). The Bluetooth devices must be paired before

the communication is performed.

Turn Bluetooth On/Off

1. Touch the Home key>

2. Slide the Bluetooth switch to the Onor Off position.

When Bluetooth is on, the