Table of Contents
Advertisement
USER MODE
Press and hold simultaneously Delay and Start until the indicators
flash.
In user mode, the following settings can be changed:
•
The level of the water softener according to the water hardness.
•
The activation or the deactivation of the acoustic signal for end of programme.
•
The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid.
These settings are saved until you change them again.
ADJUSTING THE WATER SOFTENER
While the appliance is in user mode:
1. Press Program.
•
The indicators
•
The indicator
•
The display shows the current setting: e.g.
= level 5.
THE WATER HARDNESS TABLE
German degrees
(°dH)
47 -50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
and
continues to flash.
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
2. Press Program to change the setting. Each
time you press the button, the level number
increases. After level 10 you start again from
level 1.
go off.
3. Press the on/off button to confirm the setting.
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
,
Clarke degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
and
start to
Water softener
level
10
9
8
7
6
1)
5
4
3
2
2)
1
7
Advertisement
Table of Contents
