Consumption Values; Programme Selection Mode And User Mode - Zanussi ZDLN1521 User Manual

Programme
3)
1) This programme offers the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. This is the standard programme for test institutes. This programme is used to assess
compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
2) Automatic door opening during the drying phase. Refer to "Settings".
3) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in
the appliance. Do not use detergent with this programme.

CONSUMPTION VALUES

1)2)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-
tity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according to: EN60436 ),
send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided with your appliance.
SETTINGS
PROGRAMME SELECTION MODE AND
USER MODE
When the appliance is in programme selection
mode, you can set a programme and enter user
mode.
Settings available in the user mode:
• The level of water softener according to the
water hardness.
• Activation or deactivation of the rinse aid empty
notification.
• Activation or deactivation of the acoustic signal
for the end of a programme.
Dishwasher load
All
Water
(l)
9.9
12.4
10.6
10.2
4.2
Degree of soil
All
Energy
(kWh)
0.936
1.168
0.985
0.618
0.015
• Activation or deactivation of the AirDry.
The saved settings remain valid until you
change them again.
How to set the programme selection mode
The appliance is in programme selection mode
when the programme indicator
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Programme phases
• Prewash
Duration
(min)
227
160
90
30
15
flashes.
29