Technical Information; Rating Plate; Information For Test Institutes - Zanussi ZDS15010WA User Manuals

Table of Contents

Advertisement

Problem
Limescale deposits on the table-
ware, on the tub and on the in-
side of the door.
Dull, discoloured or chipped ta-
bleware.
Refer to "Before first use", "Daily
use" or "Hints and tips" for other
possible causes.

TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot
water supply to decrease energy consumption.

RATING PLATE

16
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Even using multi-functional tabs use salt and set regeneration
of the water softener. Refer to "The water softener".
If lime scale deposits still remain, clean the appliance with
appliance cleaners which are particularly suitable for this pur-
pose.
Try different detergent.
Contact the detergent manufacturer.
Make sure that only dishwasher-safe items are washed in the
appliance.
Load and unload the basket carefully. Refer to basket loading
leaflet.
Place delicate items in the upper basket.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Possible cause and solution
446 / 850 - 880 / 615
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
2)
9
5.0
0.10

INFORMATION FOR TEST INSTITUTES

For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on
the rating plate.

Advertisement

Table of Contents
loading

Table of Contents