Configuration File Parameter Changes - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application
• 35490: SoundPoint IP 320 and 330 phones do not display SAS-VP failure
messages during boot-up
• 36031: If a phone is configured to use TLS for the 2
nd
the 2 line does not register
• 36107: SoundStation IP 4000 phone drops maximum size packets when VLAN
is enabled
• 36477: Configuring the nat.signalPort parameter may cause the phone to crash
• 36775: Route-Set susceptible to change mid-dialog in certain situations
• 36882: Selecting a speed dial number using the 'nn#' key sequence does not
work on SoundPoint IP 320 and 330 phones when the phone is unregistered or
is using URL dialing mode
• 36905: CDP packet always advertises LAN duplex mode as "Duplex: Full"
• 36948: On SoundPoint IP 320 and 330 phones, if the Dial and Menu keys are
pressed at the same time after entering digits from the idle display, incorrect
soft keys are displayed
• 36967: If the phone receives an INVITE with SDP which contains video
information, it returns a malformed response
• 37086: Phone ignores expiration date of CA certificate if SNTP is only set via
DHCP
• 37632: Out of order SCA signaling can lead to improper handling of Shared
Lines in some situations.
• 37646: DNS SRV querying after A record cache makes registration fail

2.3.4 Configuration File Parameter Changes

.cfg File Action
sip added
sip added
sip added
sip added
sip added
sip added
sip added
sip added
sip added
sip added
Page 10
Parameter
voIpProt.SIP.csta
voIpProt.SIP.serverFeatureControl.d
nd
voIpProt.SIP.serverFeatureControl.c
f
up.toneControl.bass
up.toneControl.treble
up.audioSetup.auxInput
up.audioSetup.auxOutput
up.idleTimeout
se.pat.ringer.12.inst.5.type="branch"
se.pat.ringer.12.inst.5.value="-4"
voice.txPacketFilter
Copyright © 2007 Polycom, Inc.
nd
line and TCP for the 1
Description
Not currently used, will be used in a
future release.
See Administrator's Guide for SIP
2.2.0 for details
See Administrator's Guide for SIP
2.2.0 for details
Not currently used, will be used in a
future release.
Not currently used, will be used in a
future release.
Not currently used, will be used in a
future release.
Not currently used, will be used in a
future release.
See Administrator's Guide for SIP
2.2.0 for details
See Administrator's Guide for SIP
2.2.0 for details
Changes
st
,