Version 2.0.3 B; Added Or Changed Features - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application
.cfg Action
File
sip added
sip added
sip changed
sip changed
sip changed
sip changed
sip changed
sip added
sip changed
sip changed
sip changed
sip added

2.8 Version 2.0.3 B

2.8.1 Added or Changed Features

• 14874: Added support for SoundPoint IP 650 platform
• 15775: Added support for LCD backlight on SoundPoint IP 650
• 15852: Added support for 32 MB of memory on SoundPoint IP 650
• 15853: Added support for G.722 audio code on SoundPoint IP 650
• 16335: Added support for 8 MB of flash on SoundPoint IP 650
Page 24
Parameter
voIpProt.SIP.useSendonlyHold
dialplan.applyToUserSend="1"
dialplan.applyToUserDial="1"
dialplan.applyToCallListDial="0"
dialplan.applyToDirectoryDial="0"
dialplan.digitmap.timeOut="3" to
"3|3|3|3|3|3"
tcpIpApp.sntp.daylightSavings.start.mo
nth="4" to "3"
tcpIpApp.sntp.daylightSavings.start.dat
e="1" to "8"
tcpIpApp.sntp.daylightSavings.stop.mon
th="10" to "11"
tcpIpApp.sntp.daylightSavings.stop.day
OfWeek.lastInMonth="1" to "0"
call.stickyAutoLineSeize.onHookDialing
voice.gain.rx.digital.chassis.IP_650="-9"
to "6"
voice.gain.rx.digital.ringer.IP_650="-21"
to "-12"
voice.handset.sidetone.adjust.IP_430="
-12" to "-13"
voIpProt.server.x.transport and
voIpProt.SIP.outboundProxy.transport
Copyright © 2007 Polycom, Inc.
Description
Can be set to 0 or 1. Null default is 0.
Default in sip.cfg is 1.
If set to 1, the phone will send a reinvite
with a stream mode attribute of "sendonly"
when a call is put on hold. This is the
same as the previous behavior.
If set to 0, the phone will send a reinvite
with a stream mode attribute of "inactive"
when a call is put on hold.
Note:
The phone will ignore the value of this
parameter if set to 1 when the parameter
voIpProt.SIP.useRFC2543hold
is also set to 1 (default is 0).
Refer to Technical Bulletin 11572.
Refer to Technical Bulletin 11572.
Changes to support new daylight savings
time rules.
Refer to Administrator's Guide Addendum
for SIP 2.1.
Gain changes required to match new
software load.
Added "TCPOnly" as a possible value for
these existing parameters.
Changes