Version 2.1.2; Added Or Changed Features; Removed Features; Corrections - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application
.cfg File Action
phone1 added
phone1 added
phone1 added
000000000000 added
000000000000 added
000000000000 added

2.4 Version 2.1.2

2.4.1 Added or Changed Features

• 35361: Added ability for parameters in <Ethernet address>.cfg to be
overridden by model- or platform-specific versions
• 35969: Changed behavior of the select button or right arrow button in call lists
and contact directory on SoundPoint IP 320 and 330 to give contact
information instead of acting the same as the dial key
• 36538: Added configurable failover behavior for authentication signaling to
specify that the phone first retries a SIP transaction with the server that has
just sent a 401 or 407 response
Uses new parameters voIpProt.SIP.authOptimizedInFailover and/or
reg.x.auth.optimizedInFailover
• 36647: Added configurable option allowing message waiting indicator to be
displayed although voicemail cannot be accessed
Uses new parameter up.mwiVisible
• 36681: Added logging of version information for configuration files

2.4.2 Removed Features

None.

2.4.3 Corrections

• 34899: Phone may continuously reboot if a configuration change is made then
power is disconnected and the provisioning server is unavailable
Page 14
Parameter
reg.x.serverFeatureControl.dnd
reg.x.serverFeatureControl.cf
call.missedCallTracking.x.enabled
call.callWaiting.ring
LICENSE_DIRECTORY
APP_FILE_PATH_SPIP300="sip_21
2.ld"
CONFIG_FILES_SPIP300="phone1
_212.cfg, sip_212.cfg"
APP_FILE_PATH_SPIP500="sip_21
2.ld"
CONFIG_FILES_SPIP500="phone1
_212.cfg, sip_212.cfg"
Copyright © 2007 Polycom, Inc.
Description
See Administrator's Guide for SIP
2.2.0 for details
See Administrator's Guide for SIP
2.2.0 for details
See Administrator's Guide for SIP
2.2.0 for details
See Administrator's Guide for SIP
2.2.0 for details
These are samples of the new fields
which can specify application images
and configuration files for specific
hardware platforms, in this case the
SoundPoint IP 300.
See Administrator's Guide for SIP
2.2.0 for details
These are samples of the new fields
which can specify application images
and configuration files for specific
hardware platforms, in this case the
SoundPoint IP 500.
See Administrator's Guide for SIP
2.2.0 for details
Changes