HP EliteDesk 705 G3 Hardware Reference Manual page 40

18. Secure the hard drive cage to the chassis with the three screws (3).
19. Align the hard drive guide screws with the slots on the hard drive cage, press the hard drive down into
the cage, then slide it (1) forward until it stops and locks in place.
20. Connect the hard drive power and data cable (2) to the hard drive.
21. Replace the computer access panel.
22. If the computer was on a stand, replace the stand.
23. Plug in the power cord and turn on the computer.
24. Lock any security devices that were disengaged when the computer access panel was removed.
25. Reset the date and time, your passwords, and any special system setups using Computer Setup.
34 Chapter 3 Hardware upgrades