To do...
Display information about all user
interfaces that the device supports
Display user interface information
Display the configuration of the
device when it serves as a Telnet
client
Release a specified user interface
Lock the current user interface
Send messages to the specified
user interfaces
Use the command...
display users all [ | { begin |
exclude | include }
regular-expression ]
display user-interface [ num1 |
{ aux |vty } num2 ] [ summary ] [ |
{ begin | exclude | include }
regular-expression ]
display telnet client configuration
[ | { begin | exclude | include }
regular-expression ]
free user-interface { num1 | { aux |
vty } num2 }
lock
send { all | num1 | { aux | vty }
num2 }
63
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Multiple users can log in to the
system to simultaneously configure
the device. You can execute the
command to release the
connections established on the
specified user interfaces.
You cannot use this command to
release the connection that you are
using.
Available in user view
By default, the current user
interface is not locked.
Available in user view