HP A7500 Series Configuration Manual page 60

Figure 22 Dial the number
Character string CONNECT9600 is displayed on the terminal. Then a prompt such as <HP> appears
Step6
when you press Enter.
Figure 23 Configuration page
Execute commands to configure the device or check the running status of the device. To get help, type ?.
Step7
NOTE:
To terminate the connection between the PC and device, execute the ATH command on the terminal to
•
terminate the connection between the PC and modem. If you cannot execute the command on the
terminal, input AT+ + + and then press Enter. When you are prompted OK, execute the ATH command,
and the connection is terminated if OK is displayed. You can also terminal the connection between the
PC and device by clicking
Do not close the hyper terminal directly. Otherwise, the remote modem may always be online, and you
•
will fail to dial in the next time.
on the hyper terminal window.
53