Rssi Threshold - EnGenius EAP1300EXT User Manual

RSSI Threshold

With RSSI Threshold enabled, the AP will send a disassociation request to the wireless client and let it find another AP to
handover and associate upon detecting the wireless client's RSSI value lower than specified. The RSSI value can be adjusted to
allow more clients to stay associated to this AP. Note that setting the RSSI value too low may cause wireless clients to
reconnect frequently.
RSSI Threshold: Enable the RSSI Threshold feature by ensuring that each client is served by at least one Access Point at any
time. Access Points continuously monitor the connectivity quality of any client in their range and efficiently share this
information with other Access Points in the vincinity of that client to coordinate which of them should serve the client best.
RSSI: Enter the RSSI (Received Signal Strength Index) in order to determine the handover procedure which the current wireless
link will terminate. RSSI is an indication of the power level being received by the antenna. Therefore, the higher the RSSI number,
the stronger the signal.