EnGenius EAP1300EXT User Manual page 42

*Default configuration: Default setting of channel selection is "All" to perform auto channel on the exist channel list.
*None: Click "None" to disable the setting on this radio. This radio is disabled.
*Group Configuration: Click specific groups of channels for performing auto channel function. For example, users can click U-NII-1
and U-NII-3 to perform auto channel on these bands; the mechanism of this AP will select the relatively optimal channel to peform
wireless service.
Data Rate: Select a data rate from the drop-down list. The data rate affects throughput of data in the AP. Select the best balance
for you and your network but note that the lower the data rate, the lower the throughput, though transmission distance is also
lowered.
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more
often and consumes more bandwidth.
Client Limits: Limits the total number of clients on this radio. Once setting the ceiling of client numbers, the maximum associated
client devices will be restricted at this number.
Aggregation: Integrate multiple data packets into one packet to deliver to client devices. This option reduces the number of
packets, but also increases packet sizes.