Table 2. Netvanta 3140 Series Front Panel Leds - ADTRAN NetVanta 3120 (with DBU) Hardware Installation Manual

NetVanta 3100 Series Hardware Installation Guide
STAT Off
Green (flashing)
Green (solid)
Red
Amber (solid)
USB Off
(Future Release)
Green (solid)
Amber (flashing)
Red (solid)
LINK Off
(GIG 1 - GIG 3)
Green (solid)
(1700340F1 only)
ACT Off
(GIG 1 - GIG 3)
Green (flashing)
(1700340F1 only)
Port LEDs Off
(GIG 0/1 - GIG 0/3)
Green (solid)
Amber (flashing)
On the 1700340F1, the behavior of the LINK and ACT LEDs (labeled GIG 1 through
GIG 3) on the front of the unit corresponds to the behavior of the RJ-45 LEDs (labeled
GIG 0/1 through GIG 0/3) located on the rear of the unit.
61700600L2-34C

Table 2. NetVanta 3140 Series Front Panel LEDs

Unit is not receiving power.
The unit is powering up. On power-up, the STAT LED flashes
rapidly for five seconds.
The power is on and self-test passed.
Power is on, but the self-test failed.
The unit is in bootstrap mode.
Interface is shut down or not connected.
A supported device is connected.
There is activity on the link.
An alarm condition is occurring on the USB port, or there is a
failure.
The port is administratively disabled or does not have link.
The port is enabled and the link is up.
There is no activity on the link.
There is activity on the link.
There is no activity on the link.
The port is enabled and the link is up.
There is activity on the link.
Copyright © 2015 ADTRAN, Inc.
Physical Descriptions
25