Figure 16. Netvanta 3140 Rack Mounting Brackets - ADTRAN NetVanta 3120 (with DBU) Hardware Installation Manual

Unit Installation
Rack Mounting the NetVanta 3140 Using the Rack Mounting Brackets
Step
1 Install the rack mounting brackets (1700511F1) on the NetVanta 3140 (see
damaging the unit, use only the screws shipped with the mounting brackets when attaching them
to the chassis.
2 To allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta will be positioned.
3 Position the NetVanta in a stationary equipment rack. This unit occupies 1U of space.
4 Have an assistant hold the unit in position as you install two mounting bolts through the unit's
brackets and into the equipment rack using a #2 Phillips-head screwdriver.
5 Apply power to the unit (refer to
32
Supplying Power to the Unit on page

Figure 16. NetVanta 3140 Rack Mounting Brackets

Copyright © 2015 ADTRAN, Inc.
NetVanta 3100 Series Hardware Installation Guide
Action
Figure 16). To avoid
34).
61700600L2-34C