Central Pneumatic 61454 Owner's Manual

Central Pneumatic 61454 Owner's Manual

21gal cast iron vertical

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
21
cast iron
GAL
vertical air
compressor
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
reV 15a

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic 61454

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2 Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 3 ITEM 61454 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Air Compressor Safety Warnings

    State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) SaVe tHeSe inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 5 Cubic Feet per Minute flow Canadian Standards Association Cubic Feet per Minute flow ScFM Underwriters Laboratories, Inc. at standard conditions National pipe thread, tapered Volts Alternating Current National pipe thread, straight Amperes ITEM 61454 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Setup

    Quick Gauge (53) Gauge (77) Coupler (76) Figure B: controls Output - for attaching Pressure in-line shutoff Gauge (77) valve, air hose and tool Drain Valve (66) Figure a: Functions Page 6 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 7 (all sold separately), as shown on Figure G on page 8 and Figure H on page 9. Consult your air tool’s manual for needed accessories. ITEM 61454 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Page 8 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 9 ITEM 61454 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Checking The Oil

    (OVERFILL Do not add or change the oil while as shown above) on the sight glass. the compressor is in operation. allow the compressor to cool before replacing oil. Page 10 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 11: Compressor Area Set Up

    2. Locate the Compressor on a flat level surface to ensure proper pump lubrication and to prevent damage to the unit. Keep at least 12″ of space around the unit to allow air circulation. ITEM 61454 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: General Operation

    Close the valve after moisture has drained out. Do not remove the Drain Valve. 17. Clean, then store the Air Compressor indoors. Page 12 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 13: Emergency Depressurization

    An air leak or open hose causing the compressor to cycle too often and build up heat. 3. Correct any issues before further use to avoid damage to the compressor. Figure J: reset Button ITEM 61454 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14: Maintenance

    Look for air bubbles. ** To clean the compressor surface, wipe with *** Use SAE 30W, non-detergent, a damp cloth, using a mild detergent or mild solvent. Air Compressor Oil only (sold separately). Page 14 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 15: Oil Maintenance

    If working in dirty environments, you may need to replace the filter more often. 1. Remove the Cover. 3. Replace with a new Air Filter. 2. Remove the Air Filter. 4. Replace the Cover. ITEM 61454 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Troubleshooting

    2. Reposition unit on a level surface. 3. Crankcase vent clogged. 3. Clean Crankcase vent. Follow all safety precautions whenever diagnosing or servicing the compressor. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 17: Please Read The Following Carefully

    LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. ITEM 61454 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18: Parts List And Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 18 For technical questions, please call 1-888-866-5797. ITEM 61454...
  • Page 19: Assembly Diagram

    Diagram ITEM 61454 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents