Pri30 Card - Panasonic KX-TDA100 Installation Manual

2.4.8

PRI30 Card

Function
1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.
To NT1 / Extension
To NT1/Extension
For BNC
Accessory and User-supplied Items
Accessory (included): ferrite core × 1
User-supplied (not included): RJ45 or BNC connector
Notes
• In some countries/areas, this optional service card must not be connected to the
Public Switched Telephone Network.
• When connecting this optional service card to the trunk, connect through NT1; do not
connect to the trunk directly.
• Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot
be used simultaneously.
• When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.9
Attaching a Ferrite Core".
• This optional service card can be used for either trunk or extension connection, by
setting the A/B switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1
Starting the Hybrid IP-PBX".
CAUTION
PRI ports are SELV ports and should only be connected to SELV services.
LEDs
RJ45
For RJ45
120Ω 120Ω
OR
75Ω 75Ω
2.4 Installation of the Trunk Cards
BNC (TX)
BNC (RX)
Installation Manual 83