Panasonic KX-TDA100 Installation Manual page 135

Connecting the CS
1.
Connect the cable from the CSIF card to the CS.
Modular
To CSIF card
2.
Pass the cable through the groove of the CS (in any direction depending on your
convenience). Wrap the cable once around the ferrite core. Then close the case of the
ferrite core.
To CSIF card
Note
If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the
ferrite core.
TO MAIN UNIT
/ PABX
2.8 Connection of DECT Portable Stations
Installation Manual 135