Configuring Port Mirroring; Configuring Routing - Cisco RV315W Administration Manual

Networking

Configuring Port Mirroring

STEP 3
Configuring Port Mirroring
STEP 1
STEP 2
STEP 3
STEP 4

Configuring Routing

Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click OK to save your settings.
Port Mirroring allows traffic on one port to be visible on other ports. This feature is
useful for debugging or traffic monitoring.
To configure Port Mirroring:
Click Networking > Port Mirroring. The Port Mirroring page opens.
Click Enable to enable Port Mirroring, or click Disable to disable Port Mirroring.
If Port Mirroring is enabled, enter the following information:
• Mirror Destination Port: Choose the port that monitors the transmitted (TX)
or received (RX) traffic for other ports.
• Mirror Source Port: Check the ports that are monitored. The port that you
set as a TX Destination port cannot be selected as a monitored port.
Click OK to save your settings.
This section provides information on configuring the routing mode between WAN
and LAN, viewing the routing table, and configuring the static routing, dynamic
routing, and policy-based routing settings.
5
60