Operation; Audio Connection; Bluetooth Connection - Monster Superstar Manual And Warranty

Operation

Power
SuperStar™ comes with a lithium-ion battery. For best results, fully charge
SuperStar™ before use. (recommended output of charging device is 2A)
To charge, plug the micro USB cable into SuperStar™ and plug the standard
USB connector into your power source. (Wall adapter. Laptop. Desktop.
External battery etc.) While charging the red power LED will blink. When
charging is complete, the light will be solid red.

Audio Connection

There are three ways to connect to audio sources.
• Bluetooth
• USB Cable
• Direct AUX In 3.5mm

Bluetooth Connection

To use Bluetooth for your audio connection first pair SuperStar ™ with your
audio source. (Music Player. Smartphone. Laptop. Or other Bluetooth equipped
device that can act as a source of music)
First press and hold the Bluetooth button for three seconds or until you hear
the tone. The blue Sync LED will come on and blink. This means SuperStar ™ is
in pairing mode. Make sure Bluetooth is enabled on your audio source and in a
_MAN_SuperStar_WW_g1jl.indd 10 2/7/14 10:38 A