Remote Control Batteries; General Operation - Monster KATANA Instruction Manual

Remote control batteries

1. Slide the battery cover in the direction of the arrow.
2. Fit the batteries observing polarity as shown with the type R03/AAA specified.

General Operation

Powering your player ON/OFF
To power the player ON:
1. Plug AC cord into AC jack, and the other end plug into a live AC wall outlet.
2. Press the Power button on the top panel or the remote control to switch the player to
ON mode.
To power the player OFF:
1. Press the Power button again on the top panel or the remote control to switch the player
to Standby mode.
Note: To save power, the player will switch to economic standby mode when the speaker is
idle for 15 minutes.
Using Bluetooth Function: Paring Your Device
Pairing your Bluetooth device with the player
Note:
- Before you connect a Bluetooth device to your speaker, familiarize yourself with the
Bluetooth capabilities of the device.
- The effective operation range between your speaker and the paired device is
approximately 10 meters (30feet) in open area.
- Keep your speaker away from other electronic devices that may cause interference.