Garmin GPS 400 Pilot's Manual And Reference page 58

SECTION 3
DIRECT-TO NAVIGATION
Shortcuts
Shortcuts are available when using the Direct-to Key,
allowing the pilot to bypass the use of the small and large
right knobs to enter the destination waypoint' s identifier.
A direct-to can be performed from any page displaying
a single waypoint identifier (such as the WPT pages for
airports and NAVAIDs), or from pages that display a list of
waypoints (e.g., the Nearest Airport Page).
Selecting an on-screen waypoint as a
direct-to destination:
1) If a single airport, NAVAID, or user waypoint is
displayed on-screen (Figure 3-9):
Figure 3-9 Single Waypoint Displayed
a) Press the Direct-to Key.
b) Press the ENT Key twice.
3-4
2)
GPS 400 Pilot's Guide and Reference
If a list of waypoints is displayed on-screen:
a) Press the small right knob to activate the
cursor.
b) Turn the large right knob to highlight the
desired waypoint (Figure 3-10).
Figure 3-10 Nearest List
c) Press the Direct-to Key followed by the
ENT Key twice.
190-00140-60 Rev. E