Toyota Celica Supra 1986 Service And Repair Manual page 535

Steering Gear
Housing Assembly
Bracket and
Grommet
I
kg"""
llt·lb,
N·m)
J :
Specified torque
STEERING - Power Steering
SR-27
Gear Housing
REMOVAL OF GEAR HOUSING
Intermediate Shaft
360 (25, 34)
2
. Cotter
Pin
~
t
Non·rtusable part Tie Rod
1. REMOVE INTERMEDIATE SHAFT
(See
step
2
on page SR-4)
2. DISCONNECT TI E ROD END
(a) Remove the ootter pin and nut holding the knuckle
arm to the tie rod.
(b) Using SST, disconnect the knuckle arm from the t ie
rod.
SST 09611·22012
3. DISCONNECT RETURN LINE AND PRESSURE LINE
Using SST. disconnect return and pressure lines. Use a
container to catch the power steering fluid.
SST 09631·22020
4. REMOVE GEAR HOUSING ASSEMBLY
(a) Rer;nove t he gear housing bracket set bolts.
(b) Remove the housing assembly.