Toyota Celica Supra 1986 Service And Repair Manual page 518

SR·10 STEERING - Steering Column Assembly with Tilt Steering
{g) Assemble the collar and tilt lever retainer.
Torque: 185 k!I'Cm {13 ft·lb, 18 N·m)
4 . INSTALL SHIM, BOLT AND NUT
{a) Select a shim which fits snugly when pressed in
Ill
hand.
Thickness mm {in.)
Thickness mm
(in.)
0.2 10.008)
t
,4 (0.055)
0.5 (0.020)
1.8 (0.07 1)
0.8 (0.031)
{b) Install the shim, bolt. washer and a lock nut.
Torque: 185 kg-em {13 ft·lb, 18 N·m)
'
•
i
5. INSTALL TILT STEERING SUPPORT STOPPER BOLT
{a) Install the stopper bolt. bracket. washer and nut.
{b) Ti(llten the nut by hold ing the b racket with
your ~
gers as shown.
Torque: 100 kg-em {7 ft·lb, 10 N·m)
6 . ASSEMBLE MAIN SHAFT AND UPPER BRACKET
{a) Assemble the collar, spring and main shaft, and ill$el!
them into the bracket.
{b) Using a soft jaw vise and sn ap ring pliers, install a
new snap ring by pressing the main shaft a nd uppo-
bearing.
•1