Product Features - VTech Toot-Toot Drivers RemoteControl Racer User Manual

PRODUCT FEATURES

1. OFF/MODE SELECTOR SWITCH – VEHICLE
To turn the unit ON, slide the OFF/
MODE SELECTOR SWITCH to t h e
REMOTE CONTROL MODE (
or STANDARD MODE (
To turn the unit OFF, slide the OFF/
MODE SELECTOR SWITCH to the
OFF ( ) position.
2. CHANNEL SELECTOR SWITCH
To allow the Remote Control Racer and remote control to function
together, slide the CHANNEL SELECTOR SWITCH (
the same location on the Remote Control Racer and remote control.
Note: If two or three Remote Control Racers are operating in the
same vicinity, place each unit on a different channel (
(A maximum of three Remote Control Racers can operate in
one location.)
3. FORWARD/BACKWARD BUTTONS
In REMOTE CONTROL MODE, press the FORWARD
BUTTON or BACKWARD BUTTON on the remote to make
the race car go forward or backward. (The effective distance
for the race car to recognise the remote control is 9 ft. to 18
ft. The distance will be shorter when the batteries are low.)
)
) position.
) to
).
6