Ricoh SP C260DNw User Manual page 120

5. Configuring the Machine Using Utilities
Item
WPA Passphrase
WEP Key Length
WEP Transmit Key ID
WEP Key Format
WEP Key
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
Wi-Fi Direct Settings
Item
SSID
WPA Passphrase
118
If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
of the encryption key.
Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
Select a format for entering the WEP key.
Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
• WEP key length: [64bit], Format: [ASCII]
WEP key max length: 5 characters (0x20-0x7e)
• WEP key length: [128bit], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
• WEP key length: [128bit], Format: [ASCII]
WEP key max length: 13 characters (0x20-0x7e)
Enter the SSID name.
The SSID can contain up to 32 characters.
Enter the passphrase for Wi-Fi Direct connection. You can enter 8 to 32
characters for a passphrase.
Description
Description