Adjusting The Rider Seat Height - Yamaha Super Tenere XTZ12H 2016 Owner's Manual

Adjusting the rider seat height

The rider seat height can be adjusted
to one of two positions to suit the rid-
er's preference.
The rider seat height was adjusted to
the higher position at delivery.
1 2
1. Low position
2. High position
To change the rider seat height to
the low position
1. Remove the rider seat. (See page
4-31.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
EAU49475
1
1. Rider seat height position adjuster
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the "L" mark
as shown.
1
1. Rider seat height position adjuster
2. "L" mark
3. Match mark
4-32
Instrument and control functions
4. Insert the projection on the rear of
1. Projection
2. Seat holder A (for low position)
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
3
2. Remove the rider seat height posi-
2
the rider seat into seat holder A as
shown.
1
2
4-31.)
tion adjuster by pulling it out.
4