6 Maintenance and fault rectification
24
Cut the suspension cable with an edge cutter to the requested
6
length
Remove approx. 10 cm of the cable mantle, strip off approx. 1 cm
7
of the wire ends, insert the filter adapter
Shift the seal screw, cone sleeve and seal cone to the suspension
8
cable and insert the cable into the screwed socket, insert the wire
ends through the cable entry into the mounting plate
The work steps are finished.
6.5 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
By doing this you help us carry out the repair quickly and without
having to call back for needed information.
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and, if need be, also a safety data
l
sheet outside on the packaging
Please ask the agency serving you for the address of your return
l
shipment. You can find the respective agency on our website
www.vega.com under: "Company - VEGA worldwide"
VEGAWELL 52 • 4 ... 20 mA