Finding Feature Information; Prerequisites For Configuring Ssm - Cisco Catalyst 3650 Configuration Manual

Configuring SSM
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.

Prerequisites for Configuring SSM

The following are the prerequisites for configuring source-specific multicast (SSM) and SSM mapping:
• Before you configure SSM mapping, you must perform the following tasks:
OL-29890-01
Finding Feature Information, page 231
Prerequisites for Configuring SSM, page 231
Restrictions for Configuring SSM, page 232
Information About SSM, page 233
How to Configure SSM, page 237
Monitoring SSM, page 245
Configuration Examples for Source Specific Multicast, page 246
Where to Go Next for SSM, page 247
Additional References, page 247
Feature History and Information for SSM, page 249
◦ Enable IP multicast routing. For information about this procedure, see
Multicast Routing (CLI), on page
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
C H A P T E R
256.
10
Configuring Basic IP
231