Default Igmp Snooping Configuration; Default Igmp Filtering And Throttling Configuration - Cisco Catalyst 3650 Configuration Manual

Configuring IGMP
Table 7: Default IGMP Configuration
Feature
Multilayer device as a member of a multicast group
Access to multicast groups
IGMP version
IGMP host-query message interval
IGMP query timeout
IGMP maximum query response time
Multilayer device as a statically connected member

Default IGMP Snooping Configuration

This table displays the default IGMP snooping configuration for the device.
Table 8: Default IGMP Snooping Configuration
Feature
IGMP snooping
Multicast routers
IGMP snooping Immediate Leave
Static groups
1
TCN
TCN query solicitation
IGMP snooping querier
IGMP report suppression
1 (1) TCN = Topology Change Notification

Default IGMP Filtering and Throttling Configuration

This table displays the default IGMP filtering and throttling configuration for the device.
OL-29890-01
flood query count
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Default Setting
No group memberships are defined.
All groups are allowed on an interface.
Version 2 on all interfaces.
60 seconds on all interfaces.
60 seconds on all interfaces.
10 seconds on all interfaces.
Disabled.
Default Setting
Enabled globally and per VLAN
None configured
Disabled
None configured
2
Disabled
Disabled
Enabled
Default IGMP Configuration
33