MT1–106
MANUAL TRANSMISSION
–
34. AFTER INSTALLING EXTENSION HOUSING OR
TRANSFER ADAPTOR CHECK FOLLOWING ITEMS
(a) Check to see that the input and output shafts rotate
smoothly.
(b) Check to the that shifting can be made smoothly to
all positions.
35. INSTALL RESTRICT PINS
(a) Install the black pin on the reverse gear/5th gear
side.
(b) Install another pin and torque the pins.
Torque: 37 N–m (380 kgf–cm, 27 ft–Ibf)
36. INSTALL CLUTCH HOUSING
(a) Install the clutch housing.
(b) Install and torque the nine bolts.
Torque: 36 N–m (370 kgf–cm, 27 ft–lbf )
Assembly of Transmission