MT1–71
MANUAL TRANSMISSION
–
(b) Using a magnetic finger, remove the four springs
12. REMOVE SHIFT FORK SET BOLTS
Remove the three bolts.
13. REMOVE SNAP RINGS
Using two screwdrivers and a hammer, tap out the three
snap rings.
14. REMOVE SLOTTED SPRING PINS
Using a pin punch and hammer, drive out the two pins.
15. REMOVE SHIFT FORK SHAFT NO.5
Pull out the shift fork shaft No.5 from the intermediate
plate.
Disassembly of Transmission
(Disassembly of Transmission)
and balls.