Tcp/Ip Setup - TP-Link TL-WPS510U User Manual

Network Type: To change the WLAN type to Ad-Hoc (default) or Infrastructure.
SSID: To change the SSID to connect an existing wireless network.(default: WLAN-PS)
Channel: Indicates the channel setting for this print server.
Transmission Rate: Select the basic transfer rates based on the speed of wireless network.
Wireless Mode: Select the WLAN mode based on the existing wireless network
Advanced Settings:
Security Type: To change the wireless security settings based on the existing wireless
network. Default setting is Disable.
Site Survey:
The following site survey table will provide a list of existing wireless network. You can choose one
to join in.

4.3.3 TCP/IP Setup:

Click TCP/IP, the following screen will appear.
Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related
settings automatically from your DHCP server.
TL-WPS510U Pocket-sized Wireless Print Server
Figure 4-10
69