Wrist Positioning Guide - Walgreens WGNBPW-930BT Manual

Replace the batteries if:
• The weak battery symbol appears.
• When any button is pressed and nothing is displayed
on the screen.
Note:
• If batteries are removed or replaced, the date and time
will need to be re-set either manually or automatically
using your Bluetooth mobile device.
• Replace all batteries at one time (as simultaneous set).
Use only 1.5V "AAA" alkaline batteries.
• When the batteries are removed, the measurement
values stored in memory are retained. However, the
date and time must be reset.
• Remove batteries when unit is not in use for extended
periods of time.
• Clean contacts on battery and in battery compartment
with a soft dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of
them together with the household garbage.
13

WRIST POSITIONING GUIDE

• When using wrist blood pressure monitors, it is important
to take the measurement while relaxing your wrist at heart
level. This will help ensure an accurate reading will be
taken. Because it is difficult to find the ideal location for a
wrist measurement, we have included an optional Wrist
Positioning Sensor that will assist in directing your wrist to
the ideal location for a blood pressure measurement.
• After you press START/STOP button, the display will
illuminate with different icons that are designed to help you
move your wrist. Once the ideal location is found, the Pulse
Symbol will flash and measurement will begin. Keep your
arm still until measurement is completed.
SYMBOL ACTION
Move your wrist up.
Move your wrist down.
Rotate your wrist to your left.
Rotate your wrist to your right.
Note:
• Even if the monitor is not in the ideal position after
10 seconds, the measurement will still begin. If this
occurs, the wrist symbol
stored in the memory with the measurement.
will appear and be
14