Walgreens WGNBPW-930BT Manual page 14

SYMBOL ACTION
Move your wrist up.
Move your wrist down.
Rotate your wrist to your left.
Rotate your wrist to your right.
Note:
When the Wrist Positioning Guide Function is turned
OFF, this instruction will not appear.
4. All digits will light up, checking the display functions.
The checking procedure will be completed after
about 3 seconds.
STAR T
STOP
25
5. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
6. When the measurement is completed, the cuff will
deflate entirely and systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.
Note:
• This monitor automatically turns off approximately 1
minute after last operation. You may also press the
START/STOP button to turn the unit off.
• To interrupt the measurement, you may press
the START/STOP button. The cuff will deflate
immediately after this button is pressed.
26