Bluetooth ® Operation; Applying The Cuff - Walgreens WGNBPW-930BT Manual

BLUETOOTH OPERATION
®
This monitor has Bluetooth function ON for your convenience.
This will allow your readings to automatically transmit to the
Walgreens Connect App. By turning this function OFF, the
measurements cannot be transmitted.
Turning Bluetooth Function OFF:
®
While the screen is off (nothing is shown
on the screen), press and hold the
Bluetooth button for 3 seconds to
turn Bluetooth OFF.
• When Bluetooth is OFF, measurements cannot
be transmitted to the Walgreens Connect App.
Turning Bluetooth Function ON:
®
While the screen is off (nothing is shown
on the screen), press and hold the
Bluetooth button for 3 seconds to
turn Bluetooth ON.
• When Bluetooth is ON, readings can automatically and
manually be transmistted to the App.
• The Walgreens Connect App must be open on your mobile
device in order to establish a connection with the monitor.
Bluetooth function OFF
Bluetooth function ON
Bluetooth QDID Profile Information:
QDID: 45008, 51582, & 52727
19

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc. prior to attaching
the wrist monitor. Clothing sleeves should be rolled up
and the cuff should be wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with palm
facing up as shown in Fig. A.
3. Make sure the edge of the cuff
is about 1/4"~1/2" (1 cm) from
the palm as shown in Fig. B.
Fig. A
Fig. B
20