Advertisement
Remote control
D Command formats (Continued)
D-STAR RX Call sign
Command: 20 0001, 20 0002
e ~ !0
q, w
• • •
X X
X X
X X
!5 ~ @2
@3 ~ #0
X X • • •
X X
X X
qHeader flag data (First byte)
Data
bit7 0 (Fixed) —
bit6 0 (Fixed) —
bit5 0 (Fixed) —
bit4
0/1
0=Voice, 1=Data
bit3
0/1
0=Direct, 1=Through repeater
bit2
0/1
0=No Break-in, 1=Break-in
bit1
0/1
0=Data, 1=Control
bit0
0/1
0=Normal, 1=EMR
wHeader flag data (Second byte)
Data
bit2 bit1 bit0
1
1
1
Repeater control
1
1
0
Send auto acknowledge
1
0
1
(Not used)
1
0
0
Request to re-transmit
0
1
1
Send acknowledge
0
1
0
Receive no reply
0
0
1
Repeater disabled
0
0
0
NULL
e ~ !0 : Call sign of the CALLER station (8 characters)
!1 ~ !4 : Note of the CALLER station (4 characters)
!5 ~ @2 : CALLED station's call sign (8 characters)
@3 ~ #0 : RXRPT1's call sign (8 characters)
#1 ~ #8 : RXPRT2's call sign (8 characters)
LFF: No signal has been received since the power was
turned ON.
!1 ~ !4
• • •
X X
X X
X X
#1 ~ #8
• • •
• • •
X X
X X
X X
Description
Description
D-STAR RX message
Command: 20 0101, 20 0102
q ~ @0
@1 ~ @8
X X • • •
X X
X X
q ~ @0 : Message (20 characters)
@1 ~ @8 : Call sign of the CALLER station (8 characters)
@9 ~ #2 : Note of the CALLER station (4 characters)
LFF: No signal has been received since the power was
turned ON.
D-STAR RX STATUS
Command: 20 0201, 20 0202
Data
Function
bit7
0
(Fixed)
bit6 0/1 Receiving a
voice call
bit5 0/1 Last call
finisher
bit4 0/1 Receiving a
signal
bit3 0/1 Receiving a
BK call
bit2 0/1 Receiving an
EMR call
bit1 0/1 Receiving a
signal other
than D-STAR
bit0 0/1 Packet loss
status
15
@9 ~ #2
• • •
• • •
X X
X X
X X
Description
—
While receiving a digital voice signal,
"1" is returned. (Regardless of DSQL
and CSQL setting)
When the last call was finished by a
user, "1" is returned.
When the audio tone can be heard, "1"
is returned.
While receiving a BK call, "1" is
returned.
While receiving an EMR call, "1" is
returned.
While under an interference (Mode
icon D-STAR and FM alternately
blink), "1" is returned.
While displaying a packet loss, "1" is
returned.
Advertisement
