Yamaha RX-V3200 Service Manual page 33

PLD/SRAM BUS CHECK
16. CS DL CODE
This menu is used to display the data version, TOC information and sum calculated value of the flash ROM for CS49329.
ROM DATA VERSION: Displays the data version of the Flash ROM for CS49329.
TOC AREA 0-5: Displays the TOC information.
SUM CHECK AREA 0-5: Displays the sum calculated value.
17. SOFT SW
This menu is used to switch the function settings on P.C.B. through the software so as to activate the product.
The protection function follows the P.C.B. settings. When connected to AC or in the maker preset state, the unit is
initialized to the P.C. B. setting. Display of each function after initialization varies depending on settings on P.C.B. The
operation mode can be changed by selecting the sub-menu and then using the EFFECT key. With SOF selected for the
SW mode, the settings become effective.
SW MODE: PCB or SOFT can be selected.
MODEL SETTING: V1200, V2200, V3200 or AX3200 can be selected.
TUNER DESTINATION: J, UC, ATKG or R can be selected.
TUNER EXIST: NOT or EXIST can be selected.
RDS EXIST: NOT or EXIST can be selected.
ZONE 2 EXIST: NOT or EXIST can be selected.
VIDEO FORMAT: NTSC or PAL can be selected.
Display Description
WAIT Bus is being checked.
NoEr No error detected.
DATA Data bus shorted or open. (XX: 00-07)
ADDR Address bus shorted or open. (XX: 00-0E)
RX-V3200/DSP-AX3200
32