Basic Operations; Switching The Source; Muting The Audio - Alpine PKG-RSE3HDMI Installation Manual

Basic Operations

Turning Power ON/OFF
The power state of the monitor is memorized when Ignition/ACC
is turned off. When Ignition/ACC is turned back on, the monitor
returns to the memorized power state (either ON or OFF),
including DVD playback position.
Main Control Keys
POWER ( ) to turn ON the monitor.
again.
Remote Control
POWER to turn ON and OFF.
Front Passenger Controls
PLAY/PAUSE button to turn ON.
PAUSE.

Muting the Audio

Main Control Keys
While the power is ON, press POWER (
the Mute function.
Press POWER ( ) again to turn OFF the Mute
function.
Remote Control
Press MUTE to turn it ON and OFF.
4
-EN
POWER ( )
POWER ( )
PLAY/
) to activate

Switching the Source

Main Control Keys and Remote Control
1
Press SELECT ( ) to display the Source Select
Menu.
2
Press SELECT ( ) again to cycle through the
different sources.
DVD
USB HDMI1
Remote Control
Press source buttons (DVD, USB, HDMI1, HDMI2 and
AUX) to select the source instantly.
Setting the Backlight Brightness
1
Press Dimmer ( ) on the Main Control Keys or
the remote control to cycle through High/Mid/Low.
It is also changed from the backlight tab in the
Picture Setting Menu with < or > buttons. (refer to
Monitor Setup instructions page 6)
HIGH MID
Dimmer
ENT
DVD
HDMI2 AUX
LOW
Main Control Keys