Table of Contents
Advertisement
▶ Super IO Configuration
▶ Serial Port 1/ 2/ 3/ 4/ 5 /6 /7 /8 /9 /10 (SKU1:C236)
▶ Serial Port 1/ 2/ 3/ 4/ 5 /6 (SKU2:H110)
This setting enables/disables the specified serial port.
▶ Change Settings
This setting is used to change the address & IRQ settings of the specified
serial port.
▶ Mode Select
Select an operation mode for Serial Port 1.
▶ Power Voltage
Select the power voltage for Serial Port 1.
▶ Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates
a reset when the software that it monitors does not respond as expected each
time the watch dog polls it.
MS-98E2
3-9
Advertisement
Chapters
Table of Contents
