Chassis Intrusion Header: J4; Gpio Connector: Jgpio1; Usb2.0 Connector: Jusb1, Jusb4 (Sku1:C236); Usb2.0 Connector: Jusb6, Jusb7 (Sku2:H110) - MSI MS-98E2 Manual

Industrial computer board

Hide thumbs Also See for MS-98E2:

Table of Contents

Hardware Setup

Chassis Intrusion Header: J4

This connector connects to the chassis intrusion switch cable. If the computer

case is opened, the chassis intrusion mechanism will be activated. The system

will record this intrusion and a warning message will flash on screen. To clear the

warning, you must enter the BIOS utility and clear the record.

This connector is provided for the General-Purpose Input/Output (GPIO) periph-

eral module.

USB20 Connector: JUSB1, JUSB4 (SKU1:C236)

USB20 Connector: JUSB6, JUSB7 (SKU2:H110)

This connector, compliant with Intel I/O Connectivity Design Guide, is ideal for

connecting high-speed USB interface peripherals such as USB HDD, digital cam-

eras, MP3 players, printers, modems and the like.

Important

Note that the pins of VCC and GND must be connected correctly to avoid pos-

sible damage�

2-12

Table of Contents

Table of Contents