System Assembly; Figure 5. Server Board Installation; Intel Server System R2000Wf Product Family System Integration And Service Guide - Intel R2000WF series Service Manual

Intel ® Server System R2000WF Product Family System Integration and Service Guide
1.3

System Assembly

1. Install the Server Board
a) Clear the area for server board placement by carefully moving aside any cables that may be taped to
the chassis base.
b) Remove power supplies if present.
c) Remove the server board from its anti-static bag.
d) Holding the server board by its edges, carefully lower the server board into the chassis so that the
rear I/O connectors of the server board align with and are fully seated into the matching cut outs on
the chassis back panel and each server board mounting hole is aligned with a threaded chassis
standoff. (See letter "A")
e) The server board is accurately placed when the two end screw holes nearest the front edge of the
server board sit securely onto the shouldered chassis standoffs.
f) Using 8 in-lb torque, fasten down the server board with 9 screws (See letter "B")

Figure 5. Server Board Installation

21