Dodge DURANGO 2018 User Manual page 99

display will still display a pressure value in the
different color graphic display and an "Inflate to
XX" message will be displayed. After driving the
vehicle for up to 20 minutes above 15 mph
(24 km/h), the Tire Pressure Monitoring Telltale
Light will flash on and off for 75 seconds and
then remain on solid. In addition, the instru-
ment cluster display will display a "SERVICE
TPM SYSTEM" message for five seconds and
then display dashes (- -) in place of the pressure
value. For each subsequent ignition switch
cycle, a chime will sound, the Tire Pressure
Monitoring Telltale Light will flash on and off for
75 seconds and then remain on solid, and the
instrument cluster display will display a "SER-
VICE TPM SYSTEM" message for five seconds
and then display dashes (- -) in place of the
pressure value. Once you repair or replace the
original road tire, and reinstall it on the vehicle
in place of the spare tire, the TPMS will update
automatically.
In addition, the Tire Pressure Monitoring Telltale
Light will turn off and the graphic in the instru-
ment cluster display will display a new pressure
value instead of dashes (- -), as long as no tire
pressure is below the low-pressure warning limit
in any of the four active road tires. The vehicle
may need to be driven for up to 20 minutes
above 15 mph (24 km/h) in order for the TPMS
to receive this information.
TPMS Deactivation — If Equipped
The TPMS can be deactivated if replacing all
four wheel and tire assemblies (road tires) with
wheel and tire assemblies that do not have
TPMS Sensors, such as when installing winter
wheel and tire assemblies on your vehicle.
To deactivate the TPMS, first, replace all four
wheel and tire assemblies (road tires) with tires
not equipped with Tire Pressure Monitoring (TPM)
Sensors. Then, drive the vehicle for 20 minutes
above 15 mph (24 km/h). The TPMS will chime,
the "TPM Telltale Light" will flash on and off for
75 seconds and then remain on. The instrument
cluster will display the "SERVICE TPM SYSTEM"
message and then display dashes (--) in place of
the pressure values.
Beginning with the next ignition cycle, the
TPMS will no longer chime or display the "SER-
VICE TPM SYSTEM" message in the instrument
cluster but dashes (--) will remain in place of the
pressure values.
To reactivate the TPMS, replace all four wheel
and tire assemblies (road tires) with tires
equipped with TPM sensors. Then, drive the
vehicle for up to 20 minutes above 15 mph
(24 km/h). The TPMS will chime, the "TPM
Telltale Light" will flash on and off for 75 sec-
onds and then turn off. The instrument cluster
will display the "SERVICE TPM SYSTEM" mes-
sage and then display pressure values in place
of the dashes. On the next ignition cycle the
"SERVICE TPM SYSTEM" message will no lon-
ger be displayed as long as no system fault
exists.
General Information
The following regulatory statement applies to all
radio frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC
Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interfer-
ence, and
97