Dodge DURANGO 2018 User Manual page 57

To cancel the Auto-Down movement, operate
the switch in either the up or down direction and
release the switch.
To open the window part way, push the switch to
the first detent and release it when you want the
window to stop.
Auto-Down Window Switches
Auto-Up Feature With Anti-Pinch Protection
— Driver And Front Passenger Door Only
Lift the window switch fully upward to the sec-
ond detent, release, and the window will go up
automatically.
To stop the window from going all the way up
during the Auto-Up operation, push down on the
switch briefly.
To close the window part way, lift the window
switch to the first detent and release when you
want the window to stop.
NOTE:
If the window runs into any obstacle during
Auto-Up, it will reverse direction and then go
back down. Remove the obstacle and use the
window switch again to close the window. Any
impact due to rough road conditions may trigger
the auto reverse function unexpectedly during
Auto-Up. If this happens, pull the switch lightly
to the first detent and hold it to close the
window manually.
There is no anti-pinch protection when the win-
dow is almost closed. Be sure to clear all objects
from the window before closing.
Reset Auto-Up
Should the Auto-Up feature stop working, the
window may need to be reset. To reset Auto-Up:
1. Make sure the door is fully closed.
2. Pull the window switch up to close the win-
dow completely and continue to hold the
switch up for an additional two seconds after
the window is closed.
3. Push the window switch down firmly to the
second detent to open the window com-
pletely and continue to hold the switch down
for an additional two seconds after the win-
dow is fully open.
55