Dodge DURANGO 2018 User Manual page 24

Hide thumbs Also See for DURANGO 2018:
Table of Contents

Advertisement

NOTE:
If "Unlock All Doors 1st Press" is programmed
in Uconnect Settings, all doors will unlock when
you push the button on the liftgate. If "Unlock
Driver Door 1st Press" is programmed in
Uconnect Settings, the liftgate will unlock when
you push the button on the liftgate. For further
information, refer to "Uconnect Settings" in
"Multimedia" in the Owner's Manual for further
information.
To Lock The Vehicle's Doors
With one of the vehicle's Passive Entry key fob
within 5 ft (1.5 m) of the driver or passenger
front door handle, push the door handle lock
button to lock all four doors and liftgate.
NOTE:
This feature will cause the horn to chirp when
the doors are locked with the door handle lock
button. This feature can be turned on or off.
To change the current setting, refer to
"Uconnect Settings" in "Multimedia" in the
Owner's Manual for further information.
22
Push The Door Handle Button To Lock
NOTE:
Do NOT grab the door handle, when pushing the
door handle button. This could unlock the
door(s).
Do NOT Grab Handle When Locking
NOTE:
• After pushing the door handle button, you
must wait two seconds before you can lock or
unlock the doors, using either Passive Entry
door handle or door handle button. This is
done to allow you to check if the vehicle is
locked by pulling the door handle, without the
vehicle reacting and unlocking.
• The Passive Entry system will not operate if
the key fob battery is dead.

Advertisement

Table of Contents
loading

Table of Contents