HP Integrity BL860C i4 User's & Service Manual page 71

those stored on the server blade (secondary). Below is an example of the output when upgrading
from a BL860c i4 to a BL870c i4.
[ilo002264fee1be] CM:hpiLO-> sysset
SYSSET
Current System Information Parameters:
Manufacturer
Product Name (prodname)
Secondary Product Name
Product Number (prodnum) : AM358A
Secondary Product Number : AD399A
Serial number (serial)
Secondary Serial Number
UUID (uuid)
Secondary UUID
Product ID
An Upgrade Blade Link has been detected.
Primary and secondary system parameters values do not match.
Copy secondary UUID and serial number to primary? (Y/[N]):
The product name and product number from the Upgrade Blade Link reflect a BL870c i4, while
the Secondary product name and number (from the Monarch Server) reflect the original BL860c
i4.
b. The system detects the Upgrade Blade Link and prompts you to make the required system
information exchanges between Upgrade Blade Link and the server. Enter y to approve the
exchange. You will then be informed that a reset of the iLO 3 MP is necessary for the changes to
take effect.
Copy secondary UUID and serial number to primary? (Y/[N]): y
-> Secondary system parameters values have been copied to primary
system parameters.
->System Information parameters have been updated.
iLO MP needs to be reset in order for these changes to take effect
c. Reset the iLO 3 MP by entering xd –r –nc at the Command Menu prompt.
[ilo002264fee1be] CM:hpiLO-> xd -r -nc
XD -r -nc
-> MP reset requested
MP is now being reset...
-> Command successful.
d. After the iLO 3 MP reset (less than one minute), log back into the iLO 3 MP, go to the Command
Menu, and enter sysset again to verify that the system information parameters have been set for
correctly for both Primary and Secondary. The values between Primary and Secondary should
now match.
[ilo002264fee1be] CM:hpiLO-> sysset
SYSSET
Current System Information Parameters:
: HP
: Integrity BL870c i2
: Integrity BL860c i2
: Uninitialized
: USA0003
: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
: 89742B3C-AD78-11DF-BB2A-5ABBD7A51B74
: 0x702
Optional components 71