HP Integrity BL860C i4 User's & Service Manual page 68

IMPORTANT:
Existing servers other than the Monarch Server and also any Upgrade Blades must be placed
into enclosure bays with higher numbers than those occupied by the Monarch Server.
3. Transfer the Monarch Server label carrier card to the Upgrade Blade Link:
a. Remove the label carrier card from behind the trap door of the Monarch Server Blade Link. See
Blade Link on page 130 for the trap door location. The label carrier card will look like the image
below:
b. Remove the product number portion of the Field Upgrade Only label on the Upgrade Blade Link.
This label will look similar to the image below:
Below is an example showing upgrade Blade Link sticker locations for the BL870c i4.
c. Place the product number portion from the Field Upgrade Only label on top of the old product
number and barcode on the label carrier card from the Monarch Server.
IMPORTANT:
Do not cover the serial number on the label carrier card.
d. Remove the position information label (the left hand label in the above picture) from the front of
the upgrade Blade Link bezel.
Temporarily remove the "Field Upgrade Only" label if it blocks the Blade Link trap door.
68 Optional components