Samsung AC071MN4PKH Service Manual page 49

The procedure of setting option(Cont.)
7 Set the SEG9 and SEG10 values:
a Set the SEG9 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG10 value by rotating the Wheel clockwise until the value
you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
9 Set the SEG11 and SEG12 values:
a Set the SEG11 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG12 value by rotating the Wheel clockwise until
the value you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
10 Press the (Mode) button. Auto and Off appear on the remote control display.
11 Set the SEG14 and SEG15 values:
a Set the SEG14 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG15 value by rotating the Wheel clockwise until
the value you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
12 Press the (Mode) button. Cool and Off appear on the remote control display.
Steps
4-9
Troubleshooting
Remote control display
SEG 9
SEG 10
SEG 11
SEG 12
SEG 14
SEG 15