Programming: Software Upgrade And Flexing - Motorola V180 Service Manual

Troubleshooting
Table 4. Level 1 and 2 Troubleshooting Chart (Continued)
SYMPTOM
11. Real Time Clock resetting when
standard battery is removed.
12. No or weak audio when using headset. a) Headset not fully pushed home.

Programming: Software Upgrade and Flexing

40
PROBABLE CAUSE
Lithium button cell in the display board
may be depleted.
b) Faulty connector socket on
transceiver board assembly.
Contact your local technical support engineer for information about equipment and
procedures for flashing and flexing.
July 08, 2004
VERIFICATION AND REMEDY
Refer service to a Level 3 service center for
replacement.
Ensure the headset plug is fully seated in the
connector socket. If fault not cleared, proceed to
b.
Replace the transceiver board assembly (refer
to 1c). Verify that the fault has been cleared and
reassemble the unit with the new transceiver
board assembly.
V180
6809485A79-O