Table of Contents
Advertisement
1.1 Checklist
Thank you for purchasing our POE-152S IEEE 802.3af Power over Ethernet Splitter, your Power over Ethernet
Splitter package shall contain following contents:
Check the contents of your package for following parts:
Power over Ethernet Splitter x 1
User' s manual CD x 1
DC Plug Cable x 2
15cm UTP straight network cable x 1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the orig
use them against to repack the product in case there is a need to return it to us for repair.
1.2 About the Power over Ethernet Splitter
The PLANET POE-152S is an IEEE 802.3af Power over Ethernet device that split the 48V DC over the Ethernet cable into
5/12V DC power output. Work with the IEEE 802.3af power source equipment (PSE), the POE-152S frees the device
deployment from restrictions due to power outlet locations, which eliminate the costs for additional AC wiring and reduces
the installation time.
When the PSE inserts DC Voltage into the CAT 5 cable, it allows the cable between the PSE and POE-152S to transfer
data and power simultaneously. The maximum distance between the PSE and POE-152S is 100M. With being installed,
the PSE combines the Ethernet digital data with power over the twisted pair cables as an injector, and POE-152S, the
splitter, shall separate the digital data and the power into two outputs.
With IEEE 802.3af Power over Ethernet being installed, the system administrator only has to use a single RJ-45 Ethernet
cable to carry both power and data to each device. The POE-152S also have the benefits of cost saving, as well as ease
for networking planning and higher reliability. Furthermore, upon any IEEE 802.3af being installed, the POE-152S can
make the connection while migrating or splitting the power and the Ethernet digital packets. Providing two kinds of DC
output, the POE-152S offers 2.5A and 1A DC for current model POE-152S-5V and POE-152S-12V.
1.3 Features
Complies with IEEE 802.3af, Power over Ethernet, IEEE 802.3/802.3u/802.3ab 10/100/1000Base-T
Splits the 48V DC power over RJ-45 Ethernet cable into different DC output
LED indicators power input indication
Distance up to 100 meters
Choice of splitter for 5V DC and 12V DC
Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation
Works with EIA568, category 5/5e/6,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T
1. INTRODUCTION
- 4 -
Advertisement
Table of Contents
