Specifications - Genie GS-3384 Operator's Manual

Operator's Manual

Specifications

Specifications
GS-3384
Height, working maximum
Height, platform maximum
Height, stowed maximum, rails up
Height, stowed maximum,
rails lowered
Width, standard tires
Length, platform retracted
Models with one extension deck
Length, platform extended
Models with one extension deck
Length, platform retracted
Models with two extension decks
Length, platform extended
Models with two extension decks
Length, platform retracted
Models with outriggers
Models with two super decks
Length, platform extended
Models with two super decks
Maximum load capacity
(models without capacity indicator)
Maximum load capacity
(models with capacity indicator)
Maximum load capacity,
extension deck
Maximum wind speed
Wheelbase
Turning radius (outside)
Turning radius (inside)
Ground clearance
Weight
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
2
not exceed 0.5 m/s .
46
12.1 m
10.1 m
2.7 m
2.0 m
2.1 m
3.9 m
5.4 m
3.9 m
6.6 m
4.9 m
7.4 m
1134 kg
1134 - 1878 kg
227 kg
(each extension deck)
12.5 m/s
2.9 m
5.9 m
3.1 m
33 cm
See Serial Label
2
.
GS-3384 • GS-3390 • GS-4390 • GS-5390
Airborne noise emissions
Sound pressure level at ground
workstation
Sound pressure level at platform
workstation
Guaranteed sound power level
Platform dimensions
Platform length x width
Platform extension length
Drive speeds
Stowed, maximum
Platform raised, maximum
Controls
AC outlet in platform
Maximum hydraulic pressure
(functions)
Tire size
Maximum side slope rating, stowed
position
Maximum slope rating, stowed
position
Note: Slope rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Floor loading information
Tire load maximum
Outrigger load, maximum
(If equipped)
Tire contact pressure
Occupied floor pressure
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Fifth Edition • First Printing
88 dBA
78 dBA
107 dBA
3.8 x 1.8 m
1.5 m
6.4 km/h
1.1 km/h
12.2 m / 39 sec
Proportional
Standard
241.3 bar
10-16.5 NHS
50% (26°)
50% (26°)
2161 kg
2059 kg
8.91 kg/cm
873 kPa
783 kg/m
7.68 kPa
Part No. 1278050GT
2
2